WO Mic For Linux Use Phone As Microphone In Linux

If you use Linux or Ubuntu and want to use your phone as a microphone, WO Mic is a free and simple tool for that. It helps you connect your smartphone to your computer and use it just like a regular mic, perfect for chatting, gaming, or recording audio. This guide explains how to install WO Mic on Linux, connect it through Wi-Fi or Bluetooth, and fix common issues in easy-to-understand language.

Download FREE microphone for Linux

System Requirements and Compatibility For WO Mic On Linux

WO Mic currently supports Linux x86 64-bit systems only. Make sure your system is 64-bit before installing. You will also need the WO Mic APK on your phone, which you can download for free from the Google Play Store or App Store. Once installed, your phone will send audio to your Linux computer through Wi-Fi or Bluetooth, depending on your connection type.

Official Linux Support Status

Status (Updated: July 2026): WO Mic does not currently offer an officially supported Linux desktop client. The Linux version is community-maintained and relies on manual configuration, so installation steps and compatibility may vary between distributions. New kernel or system updates can occasionally require additional troubleshooting before the application works correctly.

Download and Install WO Mic Client on Linux

Download the AppImage file named micclient-x86_64.AppImage. (this is the Linux version). After downloading, make it executable by opening your terminal and typing:

This command allows the file to run like an app.

Download FREE microphone for Linux

WO Mic Client Operations

1. Enable the Loopback Sound Module

Before using WO Mic, enable a loopback sound device. It acts like a virtual sound card that transfers sound from your phone to your PC. Run this command in the terminal:

This loads the aloop module, which allows WO Mic to capture and send your phone’s audio.

2. Connect Your Phone to Linux

Now you can connect your phone to your Linux PC. There are two main ways to connect: Wi-Fi or Bluetooth.

Option 1: Connect via Wi-Fi

Make sure your phone and computer are connected to the same Wi-Fi network.
 Open the WO Mic app on your phone and note down the IP address shown on the app’s screen.
 On your Linux PC, open the terminal where your AppImage file is located and run:

Replace 192.168.1.100 with your actual phone IP address. Once connected, your phone will start working as your microphone.

Option 2: Connect via Bluetooth

Pair your phone with your computer using Bluetooth.
 Find your phone’s Bluetooth address by going to Settings → About Phone → Status → Bluetooth address.
 In your terminal, type:

Replace xx:xx:xx:xx:xx:xx with your phone’s Bluetooth address.

3. Test Your Microphone

Once the connection is complete, test if the microphone works by recording a short audio file:

After recording, play the file to hear the result:

aplay test.wav

If you can hear your voice, your setup is complete and your phone is now your Linux microphone.

Troubleshooting Tips

If you experience glitches, no sound, or delays, try these quick fixes:

  • Run the app as root for better performance: Bluetooth.
  • Make sure your loopback module (snd-aloop) is active.
  • Check that your phone and PC are on the same Wi-Fi network.
  • If Wi-Fi is unstable, try connecting via Bluetooth. 
  • For advanced fixes, including connection errors, driver issues, and no sound problems, see WO Mic Troubleshooting guide.

PipeWire Users

Many current Linux distributions, including recent versions of Ubuntu, Fedora, Debian, and Arch Linux, use PipeWire as the default audio system instead of the older PulseAudio setup.

If the standard snd-aloop (ALSA loopback) method does not create a working microphone, the problem may be related to your PipeWire configuration rather than WO Mic.

In that case:

  • Confirm that PipeWire is running on your system.
  • Check whether a virtual audio device has been created correctly.
  • Configure a PipeWire-compatible loopback if the ALSA method does not work.
  • If the issue continues, consult your distribution’s PipeWire documentation or community resources for distribution-specific setup instructions.

How WO Mic Works on Linux?

WO Mic creates a virtual sound connection between your phone and computer. The Linux app reads your phone’s voice data and writes it into the loopback device, which other apps like Zoom, OBS, or Discord just like the standard WO Mic application can use as a normal microphone input. It works just like plugging in a real mic, but wirelessly.

Final Thoughts

Setting up WO Mic on Linux might look technical at first, but it’s actually very simple. Download the AppImage, make it executable, enable the loopback module, and connect your phone through Wi-Fi or Bluetooth. Within minutes, your Android or iPhone can work as a high-quality microphone for your Linux computer without buying new hardware.

FAQs

Does WO Mic work on all Linux versions?

WO Mic supports 64-bit Linux systems like Ubuntu, Fedora, and Debian. Older or 32-bit systems are not supported.

 You can try running the app as root or switching from Wi-Fi to Bluetooth or USB for more stable performance.

 Make sure you loaded the loopback module using sudo modprobe snd-aloop before connecting.

 Yes, you can connect using Bluetooth if Wi-Fi is unavailable.

 Yes, you can download the safest version from our website.